• Home
• Corporate Information
• Services
• Products
• Quality Assurance
• Technical
  • Concentricity Tolerances
  • Linear Tolerances
  • Pressure Tightness
  • Surface Finish
  • Cored Holes
  • Ejector Pins & Draft
• News
• Contact

For document downloads please use the button below. You must have a valid username and password.

Cored Holes

Optimum greatest depth of cored holes as related to diameter is shown in the table. The values shown for hole depths are subject to the draft requirements.

*For cores larger than 25.4 mm in diameter the diameter depth shall be 1:6.

Note - The depths shown are not applicable under conditions where small diameter cores are widely spaced and, by design are subject to full shrinkage stress